ITALIANO
CDB ENGINEERING SPA

Your Partner in filtration and process equipment

Filters and Strainers ┬╗ Strainers ┬╗ Conical strainers "FC"

Other Strainers:

Forged Forged Cast Fabricated Flat strainers Fabricated Pressure seal Angle

Conical type temporary strainers are designed for the efficient removal of solids in new pipeline start up service.

They are compact and rugged and can be installed either vertically or horizontally.

They can be manufactured using any kind or wire mesh or perforated plate, in carbon and stainless steel or exotic alloys.

Given dimensions are for reference purpose only.

Strainers may be manufactured to any customer?s standard.

Strainers are designed to be installed between ANSI B16.5 flanges and meet FF, RF and RTJ facings.

POS.DESCR.MAT.MAT.
1RINGC.S.Ss 304/316
2PERF. PLATESs 304Ss 304/316
3REINFORCEMENTSSs 304Ss 304/316

CDB ENGINEERING SPA
 

Tel. +39 0377 912268/5

Fax +39 0377 910668

Email info@cdbengineering.com

SIZE
(INCHES)
1 1/2"2"3"4"6"8"10"12"14"16"18"20"24"
R1110108866666666
D7392127157216270324381412470534584692
H70707080100100110110120130130140150
L (FC1)30035045046067068080095010701220135015401850
L (FC2/FC3)14018023026040047052060068078090010001230
C20202020202020202020202020
S33333355810101010
A (SCH STD)30406590140190235285315365420460560
B4040657095115130170180200215250285

DIMENSIONS: D, H, L, C, S, A, B ARE IN MILLIMETERS (MM)

OTHER SIZES ON REQUEST

03/10
Conical strainers Conical strainers Conical strainers Conical strainers

Assembly instruction

1) Insert the strainers between the two flanges

2) Make sure the two gasket are fitted on both sides

3) Tighten bolts, keeping the strainers + gaskets in the correct position

 

Maintenance instructions

1) Unscrew bolts

2) Remove the strainers and clean or replace it

3) When re-assembling use new gasket

CDB ENGINEERING RESERVE THE RIGHT TO CARRY OUT ANY NECESSARY MODIFICATION WITHOUT PRIOR NOTICE

COMPANY

PRODUCTS

INFO

Linkedin Youtube chanel

All right reserved. Copyright 2017 by CDB ENGINEERING SPA

Address: L. Maggi, 19 - 26841 Casalpusterlengo (LO) Italy

Paid up share Capital Euro 1.050.000,00 i.v.

VAT NO. 02977730965 - N. REA 1449742

Trademarks are register by their owner