ITALIANO
CDB ENGINEERING SPA

Your Partner in filtration and process equipment

Filters and Strainers ┬╗ Strainers ┬╗ "T" type "FT" 150# to 600#, 900# to 1500#

CDB ENGINEERING fabricated tee type strainers have been specifically designed to meet all customer requirements including for high pressure applications.

Standard strainers are equipped with screens for the average service of most mediums (steam, gas, air, oil, chemicals , etc.).

The large screen open area ensures an efficient filtering action with a low pressure drop.

Filtering area to inlet area ratio is larger than 3 to 1.

Standard features include low pressure drops at high velocities, stainless steel perforated baskets as standard, vents and drains with the possibility to supply davit lifts, quick open closures, dp gauges.

We are also able to manufacture against customer requests in all types of sizes & materials.

Other Strainers:

Forged Forged Cast Fabricated Angle Conical strainers Flat strainers Fabricated Pressure seal
POS.DESCR.MAT.SPARE
1BODYACC TO M.R. 
2FLANGE  
3COVER  
4BASKET X
5GUIDE RODS  
6GASKET X
7BOLTING  
8DRAIN  
9HINGE*  
10DAVIT*  
*OPTIONAL

CDB ENGINEERING SPA
 

Tel. +39 0377 912268/5

Fax +39 0377 910668

Email info@cdbengineering.com

CONNECTIONS
BUTTWELDASME B16.25
FLANGEDASME B16.5
SIZE2"3"4"6"8"10"12"16"18"20"24"26"28"30"32"34"36"38"40"

H1=HX2                                                                                             RATING 150#

L1271722102863564325086106867628649901042111811941270134614221498
L12543123634645606367378649661052116911721236132214141494158516741759
H148182208260311351403472525571635586618661707747792837880
H1=HX2                                                                                             RATING 300#
L1271722102863564325086106867628649901042111811941270134614221498
L126833238248357966876990310041086120112831345143815341620171218101900
H1581972252813333854385115656096736426727197678108569051071
H1=HX2                                                                                             RATING 600#  
L1271722102863564325086106867628649901042111811941270134614221498
L128635142753563675083397910671156128413561427153116301541183617882043
H1772162603243824474925746246767536787147668157709188941195
H1=HX2                                                                                             RATING 900#
L127172210286356432508610686762864        
L13433894535796948139221056115712711462        
H219242279353419485549626689752879        
H1=HX2                                                                                             RATING 1500#
L127172210286356432508610686762864        
L134342147264379695310871256135414881691        
H2192742984175216257148168869681108        
03/10

Maintenance

Strainer maintenance should be made at least once year, or whenever the pressure drop is found to be in excess of the normal figures. A quick clean-up system, to made approximately once a mounth. For a complete maintenance follow the points herebelow: -1- Be sure that the main line has been shut-off. -2- Untighten cover stud bolts and nuts, remove cover and gasket . -3- Withdraw basket and carefully inspect it for damages. If any hole in the screen is found abstructed, then clean it . If the basket is broken in any part or out of shape, replace it with a new spare one. -4- Carefully clean the inside of the strainer body. -5- Fit a new gasket . -6- Install the new screen or the cleaned one . -7- Put in place cover . -8- Slowly give pressure to the line, checking for leakages. -9- Write on the strainer body the date of this maintenance operation.

CDB ENGINEERING RESERVE THE RIGHT TO CARRY OUT ANY NECESSARY MODIFICATION WITHOUT PRIOR NOTICE

COMPANY

PRODUCTS

INFO

Linkedin Youtube chanel

All right reserved. Copyright 2017 by CDB ENGINEERING SPA

Address: L. Maggi, 19 - 26841 Casalpusterlengo (LO) Italy

Paid up share Capital Euro 1.050.000,00 i.v.

VAT NO. 02977730965 - N. REA 1449742

Trademarks are register by their owner