ITALIANO
CDB ENGINEERING SPA

Your Partner in filtration and process equipment

Filters and Strainers ┬╗ Strainers ┬╗ Angle "T" type strainers "FTA"

Other Strainers:

Forged Forged Cast Fabricated Conical strainers Flat strainers Fabricated Pressure seal

CDB ENGINEERING fabricated tee type strainers have been specifically designed to meet all customer requirements including for high pressure applications.

Standard strainers are equipped with screens for the average service of most mediums ( steam, gas, air, oil, chemicals , etc. ).

The large screen open area ensures an efficient filtering action with a low pressure drop.

Filtering area to inlet area ratio is larger than 3 to 1 .

Standard features include low pressure drops at high velocities, stainless steel perforated baskets as standard, vents and drains with the possibility to supply davit lifts, quick open closures, dp gauges.

We are also able to manufacture against customer requests in all types of sizes & materials.

POS.DESCR.MAT.SPARE
1BODYACC TO M.R. 
2FLANGE  
3COVER  
4BASKET X
5GUIDE RODS  
6GASKET X
7BOLTING  
8DRAIN  
9HINGE*  
10DAVIT*  
*OPTIONAL

CDB ENGINEERING SPA
 

Tel. +39 0377 912268/5

Fax +39 0377 910668

Email info@cdbengineering.com

CONNECTIONS
BUTTWELDASME B16.25
FLANGEDASME B16.5
SIZE2"21/2"3"4"5"6"8"10"12"14"16"18"20"24"

RATING 150#

S127152171210248286356432508559610686762854
L263,576,285,7105124143178216254279305343381432
L125829531536642946756363974181786896910551172
L152174186211243263314354406447474528674638
O152178190229254279343406483533597636698813

RATING 300#

S127152171210248286356432508559610686762854
L263,576,285,7105124143178216254279305343381432
L1271309334385448486582671772849906100710801204
L162184200228263284336387441482514568612676
O165190210254279318381444521584648711775914

RATING 600#  

S127152171210248286356432508559610686762854
L263,576,285,7105124143178216254279305343381432
L1290328353430493537639753836906982107111601287
L181203219263301327386451495533578629679755
O165190210273330356419508559603686743813940

RATING 900#

S127152171210248286356432508559610686762854
L263,576,285,7105124143178216254279305343381432
L1  39145551858269681792510011058116012741465
L  244282320357422489552597628696756882
O  2412923493814705466106417057878571041

RATING 1500#

S127152171210248286356432508559610686762854
L263,576,285,7105124143178216254279305343381432
L1347379423474576645798957109011731249135714901693
L2222412703013714165015976797307818519331060
O2162442673113753944835846737498289149841168

RATING 2500#

S127152171210248286356432508559610686762854
L263,576,285,7105124143178216254279305343381432
L1398455525607722849100712871452     
L260295339390463543641819921     
O235287305356419483552673762     
03/10
Angle Angle Angle Angle

Maintenance

Strainer maintenance should be made at least once year, or whenever the pressure drop is found to be in excess of the normal figures. A quick clean-up system, to made approximately once a mounth. For a complete maintenance follow the points herebelow: -1- Be sure that the main line has been shut-off. -2- Untighten cover stud bolts and nuts, remove cover and gasket . -3- Withdraw basket and carefully inspect it for damages. If any hole in the screen is found abstructed, then clean it . If the basket is broken in any part or out of shape, replace it with a new spare one. -4- Carefully clean the inside of the strainer body. -5- Fit a new gasket . -6- Install the new screen or the cleaned one . -7- Put in place cover . -8- Slowly give pressure to the line, checking for leakages. -9- Write on the strainer body the date of this maintenance operation.

CDB ENGINEERING RESERVE THE RIGHT TO CARRY OUT ANY NECESSARY MODIFICATION WITHOUT PRIOR NOTICE

COMPANY

PRODUCTS

INFO

Linkedin Youtube chanel

All right reserved. Copyright 2017 by CDB ENGINEERING SPA

Address: L. Maggi, 19 - 26841 Casalpusterlengo (LO) Italy

Paid up share Capital Euro 1.050.000,00 i.v.

VAT NO. 02977730965 - N. REA 1449742

Trademarks are register by their owner